DRY ICE BLASTING MACHINE
Agency: | |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159631381399112 |
Posted Date: | Jan 18, 2024 |
Due Date: | Jan 25, 2024 |
Source: | https://sam.gov/opp/4a246a49f3... |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-05:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Jan 18, 2024 08:47 am EST
- Original Response Date: Jan 25, 2024 05:00 pm EST
- Inactive Policy: 15 days after response date
- Original Inactive Date: Feb 09, 2024
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 3419 - MISCELLANEOUS MACHINE TOOLS
-
NAICS Code:
- 333998 - All Other Miscellaneous General Purpose Machinery Manufacturing
-
Place of Performance:
Portsmouth , VA 23709USA
SYNOPSIS:
The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINs) are as follows:
CLIN 0001
QTY 1 EA
Dry Ice Blaster (Cleaner), Cold Jet Model AERO2 PCS 60 or EQUIVALENT
Equipped with:
2E1120 AERO2 PERFORMANCE APPLICATOR, 3/4”
5E0175 323S1 100cfm @ 80psi (2.8m3 /min @ 5.5 bar) 1 in (2.5 cm) 2-4 lbs/min (0.9-1.8 kg/min) 23 in (58.4 cm) Aluminum 2E02092N0566 AERO2 HYBRID BLAST HOSE - 3/4
2N0199 AIR SUPPLY HOSE - 25' (7.6 M)
420590 HOSE CARRIER
420597 HOSE WRAP
2M0039 WATER SEPARATOR WITH FILTER
3T0466 AERO2 APPLICATOR HOSE WRENCH, 1.5" X 1.25", STAINLESS STEEL
3T0467 AERO2 APPLICATOR WRENCH, 1" X .8725" , STAINLESS STEEL
2H0029 POWER CORD - 15' 110 V
70960-001 PRECISION ACCESSORY KIT
2E1063 AERO2 PRECISION APPLICATOR, 1/2"
5E0532 MC88 30cfm @80 psi (0.9 m3 /min 5.5 bar) Fan 0.88 in (2.2 cm) 0.5-1.2 lbs/min 0.2-0.6 kg/min 5 in (12.7 cm) Plastic & Aluminum
13865-506 MC31 Blue 13865-506 50cfm @80 psi (1.5 m3 /min 5.5 bar) 0.31 in (.8 cm) 0.5-1.2 lbs/min 0.2-0.6 kg/min 6 in (15.2 cm) Plastic
2N0565 AERO2 HYBRID BLAST HOSE - 1/2"; 12' (ELECTRIC)
70982-001 COLD JET CONNECT BASIC
ORDERING DATA DETAILS
AERO2 PCS 60
MACHINE DIMENSIONS Length x Width x Height: 39 in (99 cm) x 19 in (48 cm) x 45 in (114 cm)
Weight: 269 lb (122 kg)
POWER REQUIREMENTS 110/220V AC (50/60 Hz)
HOPPER CAPACITY 60 lb (27 kg)
HMI DISPLAY 7" LCD Color Screen
FEED RATE Variable - up to 4 lb/min (1.8 kg/min)
PARTICLE CONTROL SYSTEM Variable Dry Ice Size: 3mm - 0.3mm Utilizes 28 distinct dry ice particle sizes
BLAST PRESSURE RANGE 20 - 145 psi (1.4 - 10 bar)
COMPRESSED AIR SUPPLY 40 - 145 psi (2.8 - 10 bar)
NOZZLE AIR CONSUMPTION 12 - 100 cfm (0.3 - 2.8 m3 /min) at 80 psi (5.5 bar)
BLAST FLOW PATH 3/4" Straight Through Tubing
SUREFLOW Thumper, Ramrods, Electric Vibrator "Always-On" Hopper Agitation
dry ice is cut into diamond shaped particles in the exact dimensions chosen by the
operator (3mm pellets to 0.3mm particles and every size in between), allowing the user to fine-tune
blasting parameters for each unique application.
Features
• Advanced Aerodynamic Low Load Airlock Feeder leads to consistent and pulse-free blast stream,
• 7" LCD screen with digital controls
• Coated tool grade aluminum alloy, stainless steel and polymer frame
• Patented Advanced Direct Drive Feeding System
• Real-time machine data & analytics (dry ice usage, average feed rates, daily runtime, and more)
• Monthly usage reports and custom reports for user defined time frames and projects
• Data export for easy import to your choice of Business Intelligence platform Specifications
• Variable Dry Ice Size: 3mm - 0.3mm
AERO2 PERFORMANCE APPLICATOR, 3/4"
Lightweight and ergonomically designed applicator allows for easy use and reduced arm fatigue.
Featuring membrane switches, hopper level indicator and built in lights.
Features
• Lightweight
• Membrane switches - for reliability and improved performance
• Hopper level indicator
• Built-in lights with three dimming options
• Integrated Quick Change feature so that nozzles can be changed safely and easily
• Safety switch
323Sl
1" (2.5 cm) blast swath and 23" (58.4 cm) is best suited for aggression at most pressure levels.
NOZZLE HANDLE -1" (2.5 CM) OD
Slide easily and rotate around nozzle and ext. tube for optimal control.
Features
• Fully adjustable
Specifications
• Allows for a horizontal or vertical orientation
• 1" (2.5 cm) OD
AERO2 HYBRID BLAST HOSE – 3/4"
Designed to eliminate constrictions and freezing up during blasting. Rated to 300 psi (20.7 bar)
Features
• Enhanced ergonomic design
• Quick-disconnect coupling fittings
AIR SUPPLY HOSE - 25' (7.6 M)
Used to carry pressurized air from air source to blast unit.
Specifications
• 25' (7.6 m) Section 1" (2.5 cm) ID 300 psi (20.7 bar)
HOSE CARRIER
Durable handle with straps to help hang and carry hoses when moving or storing.
HOSE WRAP
Wrap used to assist in control and storage of your hoses.
WATER SEPARATOR WITH FILTER
The water separator comes pre-configured and ready to install.
Features
• Helps reduce excess water in high humidity environments
• Sight glass to monitor moisture levels
• Easy to install with minimal tools
POWER CORD - 15' 110 V
15' (4.6 m) of 110 V electrical power cord.
• Part#: 2H0029
PRECISION ACCESSORY KIT
1/2" Precision Accessory Kit includes Applicator, Hose, and choice of two (2) Nozzles
AERO2 PRECISION APPLICATOR, 1/2"
Small, ergonomically designed applicator allows for ease of use, greater control of blasting and reduced
arm fatigue.
Features
• Lightweight
• Membrane switches - for reliability and improved performance
• Hopper level indicator
• Built-in lights with three dimming options
• Integrated Quick Change feature so that nozzles can be changed safely and easily
• Safety switch
MC88
Fan Blast swath nozzle.
Specifications
• Flow rate: 30 cfm (0.8 m3/min) at 80 psi (5.5 bar)
MC31
50 cfm (1.4 m3/min), 611 (15 cm) Long, 5/16" (7.9 mm) blast swath.
Specifications
• Requires 50 SCFM (1.4 m3/min) at 100 psi (6.9 bar)
AERO2 HYBRID BLAST HOSE - 1/2"; 12' (ELECTRIC)
Designed to eliminate constrictions and freezing up during blasting. Rated to 300 psi (20.7 bar).
Features
• Enhanced ergonomic design
• Quick-disconnect coupling fittings
COLD JET CONNECT BASIC
Customer Service and Support Programs are available.
Features
• Easily access machine documentation, such as your operator manual, operator training videos, and
product documentation.
• Directly access customer service via phone, integrated chat, or service request form.
• Quickly access parts and accessories catalog and request a quote.
The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 333998: All Other Miscellaneous General Purpose Machinery Manufacturing with a size standard of 700. The Product Service Code is 3419, Miscellaneous Machine Tools.
The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE.
The solicitation number is SPMYM124Q0046, and it is expected to be available on or about 18 JAN 2024 and posted to SAM.gov, https://sam.gov/. Quotes will be due by 5:00 PM EST on 25 JAN 2024. Responses to the solicitation notice shall be emailed to the attention of David Mootz at david.mootz@dla.mil. Please make sure that the solicitation number (SPMYM124Q0046) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offerors to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to David Mootz at david.mootz@dla.mil.
- CONTRACTING DIVISION (DLA-NMAB)
- PORTSMOUTH , VA 23709-5000
- USA
- DAVID MOOTZ
- DAVID.MOOTZ@DLA.GOV
- Phone Number 7572788372
- Jan 18, 2024 09:52 am EST Solicitation (Original)
- Jan 18, 2024 08:47 am ESTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.