HOSE ASSEMBLY, STEAM, 2"
| Agency: | |
|---|---|
| Level of Government: | Federal |
| Category: |
|
| Opps ID: | NBD00159470864201991 |
| Posted Date: | Nov 9, 2023 |
| Due Date: | Nov 21, 2023 |
| Source: | https://sam.gov/opp/265fe3fb6b... |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Solicitation (Original)
- All Dates/Times are: (UTC-05:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Nov 09, 2023 09:12 am EST
- Original Date Offers Due: Nov 21, 2023 01:00 pm EST
- Inactive Policy: 15 days after date offers due
- Original Inactive Date: Dec 06, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 4720 - HOSE AND FLEXIBLE TUBING
-
NAICS Code:
- 326220 - Rubber and Plastics Hoses and Belting Manufacturing
-
Place of Performance:
Portsmouth , VA 23709USA
HOSE ASSEMBLY, STEAM, 2"
2" INSIDE DIAMETER x 2.625" OUTSIDE DIAMETER x 25 FEET LONG*
(+/- 12" length tolerance prior to attachment of end fittings)
• TEMPERATURE RATING TO BE 450 DEGREE FAHRENHEIT
• MINIMUM OPERATING PRESSURE TO BE 250.0 POUNDS PER SQ. INCH
• BURST TEST PRESSURE TO BE 2500.0 POUNDS PER SQ. INCH
• INNER CONVEYING TUBE MATERIAL TO BE EITHER BUTYL, CHLOROBUTYL, BROMOBUTYL, OR ETHYLENE-PROPYLENE-DIENE-TERPOLYMER.
• INSIDE SURFACE CONDITION TO BE SMOOTH
• OUTER COVERING ENVIRONMENTAL PROTECTION TO BE ABRASION, OZONE AND STEAM RESISTANT
• FIRST LAYER TO BE BRAIDED STEEL WIRE
• SECOND LAYER TO BE MOLDED RUBBER
• THIRD LAYER TO BE BRAIDED STEEL WIRE
• OUTER LAYER TO BE MOLDED RUBBER
2
• STAINLESS STEEL LINER TO BE 1.75" INSIDE DIAMETER x 0.015" THICK. THE METAL LINER SHALL BE TYPE 302, 304, 316, OR 321 STAINLESS STEEL.
• STAINLESS STEEL LINER TO BE PERMINENTLY/MECHANICALLY ATTACHED TO HOSE END FITTINGS
• EACH ASSEMBLY TO BE COUPLED, MALE x FEMALE BOSS AND SPUD WITH POLYMER SEAT. MALE BOSS AND POLYMER SPUD TO BE PERMANENTLY ASSEMBLED AND READY FOR USE. MALE END WILL BE A MNPT X HOSE STEM WITH A FEMALE SPUD ON THE END (DIXON MS26 AND B28). THE FEMALE END WILL BE A STEM WITH WING NUT (DIXON GB26 AND B27)
• EACH COMPLETED HOSE ASSEMBLY SHALL BE HYDROSTATICALLY TESTED TO 250 PSI AND HELD FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES ALLOWED.
• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE
ASSEMBLIES (HOSE AND FITTINGS) HAVE BEEN HYDROSTATICALLY
TESTED TO 250 P.S.I. FOR 10 MINUTES WITH ZERO LEAKS AND/OR
BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE
135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE
FILED WITH THE CONTRACT.
• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING THE EVALUATION PROCESS.
• EACH HOSE ASSEMBLY SHALL BE PERMANENTLY MARKED, AT A MINIMUM, WITH REQUISITION NUMBER, WORKING PRESSURE AND MANUFACTURER'S NAME. ATTACHING TAGS ARE NOT ACCEPTABLE
• HOSES MUST BE PALLETIZED
- CONTRACTING DIVISION (DLA-NMAB)
- PORTSMOUTH , VA 23709-5000
- USA
- Sheree McDonnell
- sheree.mcdonnell@dla.mil
- Phone Number 7573759313
- Nov 09, 2023 09:12 am ESTSolicitation (Original)
- Nov 09, 2023 09:05 am EST Presolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.