Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 0001BlackfishTools and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 550.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids.

The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on:

2023-06-13 15:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.

FOB Destination shall be Fort Eustis, VA 23604

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: multimeter, 2, EA;
LI 002: insulated tool kit, 2, KIT;
LI 003: wire marker, 4, EA;
LI 004: tool backpack, 2, EA;
LI 005: zipties, 10, EA;
LI 006: electrical tape, 10, EA;
LI 007: digital clamp meter, 2, EA;
LI 008: fluke test lead kit, 2, KIT;
LI 009: inspection light, 2, EA;
LI 010: nitrogen refill machine, 2, EA;
LI 011: test lead kit, 2, KIT;
LI 012: Hvac Digital multi refrigerants gauges, 2, EA;
LI 013: recovery machine portable, 2, EA;
LI 014: recovery cylinder 50lb bottle, 6, EA;
LI 015: refrigerent evacuation pump 10cfm displacement, 2, EA;
LI 016: infrared thermometer -58 degree F -2282 degree F, 2, EA;
LI 017: charging vacuum hoses 1/4 inch female connection 72" long, 3, EA;
LI 018: flourescent dye injection kit, 3, KIT;
LI 019: solenoid service magnet 1 19/32 in. Lg, 4, EA;
LI 020: nitrogen purging adapter, 2, EA;
LI 021: Jug warmer metal cylinder 24in. Lg, 6 in. wide 1.6Amp, 2, EA;
LI 022: speciality gas regulator single stage 800psi, 2, EA;
LI 023: flaring tool single 45 degree aluminum/brass/copper self center, 2, EA;
LI 024: box end wrench 1/4" 5/16 inch head size 4 1/2" long, 2, EA;
LI 025: tube expander kit aluminum/copper 6 heads included 0.06 in max wall thick case, 2, KIT;
LI 026: ratcheting tube bender set, manual 2 1/2" to 6" centerline bend radius, 0-90 degree, 2, SET;
LI 027: tool holder with wheels, 2, EA;
LI 028: neck lamp/ head lamp, 8, EA;
LI 029: wizbanger 1/2 inch diameter, 3, EA;
LI 030: wizbanger 1/2 inch cap, 3, EA;
LI 031: wizbanger 1/2 inch hoses 50ft, 3, EA;
LI 032: Fuel HTIW with grease gun, 2, EA;
LI 033: 6" adjustable wrench, 2, EA;
LI 034: 12" adjustable wrench, 2, EA;
LI 035: 7" diagonal pliers, heavy duty, 2, EA;
LI 036: 7-1/8" chain noses pliers with wire cutters, 2, EA;
LI 037: 10" quick release locking plier with curved jaw, 2, EA;
LI 038: 6" quick release locking plier with long nose, 2, EA;
LI 039: 6" slip joint pliers, 2, EA;
LI 040: 10" tongue and groove pliers, 2, EA;
LI 041: 10"electrical connector pliers, 2, EA;
LI 042: 12" wiretwister, automatic, diagonal nose, right hand twist, 2, EA;
LI 043: ball peen hammer, 1lb, 2, EA;
LI 044: tool long pin punch 3/8" x 1/2" x 8", 2, EA;
LI 045: Pine punch 1/8" x 5/16" x 5", 2, EA;
LI 046: Pine punch 1/4" x 3/8" x 7", 2, EA;
LI 047: Pine punch 5/16" x 7/16" x7", 2, EA;
LI 048: Center punch 3/8" x5", 2, EA;
LI 049: Brass drift punch 3/4" x 8", 2, EA;
LI 050: Brass taper punch 1/4" x 4", 2, EA;
LI 051: Brass drift punch 1/2" x 7", 2, EA;
LI 052: cold chisel 3/4" x 5/8" x 7", 2, EA;
LI 053: 18" rolling head pry bar, 2, EA;
LI 054: 32 pc. Feeler gauge set, 2, SET;
LI 055: inspection mirror oval 1" x 2" telescoping handle, 2, EA;
LI 056: magnetic retrieving tools, 2, SET;
LI 057: 1/4" drive T15 torx plus bit, 2, EA;
LI 058: 1/4" drive T25 torx plus bit, 2, EA;
LI 059: 10" mill file, flat, american pattern, 2, EA;
LI 060: 12 pc swiss pattern hand file set, 2, SET;
LI 061: 7 drawer tool chest, 2, EA;
LI 062: 8" hand file, round, american pattern, 2, EA;
LI 063: adjustable file handle (attaches to a file), 2, EA;
LI 064: jab saw, 2, EA;
LI 065: LED flashlight, 2, EA;
LI 066: 6" machinist's ruler, 2, EA;
LI 067: multi-tool (like gerber), 2, EA;
LI 068: oval sash brush, 2, EA;
LI 069: padlock, 2, EA;
LI 070: putty knife 2 inch, 2, EA;
LI 071: safety glasses, 2, EA;
LI 072: tape measure 12 ft 3.5 meter, 2, EA;
LI 073: tote bag, 2, EA;
LI 074: dual material philips screwdriver #1 x3", 2, EA;
LI 075: dual material philips screwdriver #2 x4", 2, EA;
LI 076: dual material phillips screwdriver #3 x 6", 2, EA;
LI 077: dual material slotted screwdriver 1/4 x 4", 2, EA;
LI 078: dual material slotted screwdriver 5/16 x 6", 2, EA;
LI 079: dual material slotted screwdriver 3/8 x 8", 2, EA;
LI 080: offset ratcheting screwdriver 1/4" slotted and #2 phillips, 2, EA;
LI 081: 7 pc ratcheting screwdriver set, 2, EA;
LI 082: 7/16 x 1/2 Obstruction / Half Moon Wrench, 2, EA;
LI 083: 9/16 x 5/8 Obstruction / Half Moon Wrench, 2, EA;
LI 084: 13 Piece Long Arm Hex Key Set, 2, EA;
LI 085: 9 Piece Long Arm Metric Hex Key Set, 2, EA;
LI 086: 1/4" Drive Driver 6", 2, EA;
LI 087: 1/2" Drive Speeder 19", 2, EA;
LI 088: 1/4" Drive Adapter 1/4" F x 3/8"M, 2, EA;
LI 089: Adjustable Hook Spanner Wrench 3/4-2", 2, EA;
LI 090: 3/8" Drive Standard Length Hex Driver Socket 5/32" Bit, 2, EA;
LI 091: 3/8" Drive Standard Length Hex Driver Socket 3/16" Bit, 2, EA;
LI 092: 3/8" Drive Standard Length Hex Driver Socket 7/32" Bit, 2, EA;
LI 093: 3/8" Drive Standard Length Hex Driver Socket 1/4" Bit, 2, EA;
LI 094: 3/8" Drive Standard Length Hex Driver Socket 5/16" Bit, 2, EA;
LI 095: 3/8" Drive Standard Length Hex Driver Socket 3/8" Bit, 2, EA;
LI 096: 1/2" Drive Standard Length Hex Driver Socket 1/2" Bit, 2, EA;
LI 097: 1/2" Drive Standard Length Hex Driver Socket 9/16" Bit, 2, EA;
LI 098: 3/8" Drive Breaker Bar 8-1/2", 2, EA;
LI 099: 1/2" Drive Breaker Bar 17", 2, EA;
LI 100: 1/4" Drive Locking Extension 3", 2, EA;
LI 101: 1/4" Drive Locking Extension 6", 2, EA;
LI 102: 3/8" Drive Locking Extension 3", 2, EA;
LI 103: 3/8" Drive Locking Extension 6", 2, EA;
LI 104: 1/2" Drive Locking Extension 3", 2, EA;
LI 105: 1/2" Drive Locking Extension 5", 2, EA;
LI 106: 1/2" Drive Locking Extension 10", 2, EA;
LI 107: Double Head Flare Nut Wrench 3/8X 7/16, 2, EA;
LI 108: Double Head Flare Nut Wrench 1/2 X 9/16, 2, EA;
LI 109: Double Head Flare Nut Wrench 5/8X 11/16, 2, EA;
LI 110: Double Head Flare Nut Wrench 3/4X 7/8, 2, EA;
LI 111: 5/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 112: 11/32" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 113: 3/8" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 114: 7/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 115: 1/2" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 116: 9/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 117: 5/8" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 118: 11/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 119: 3/4" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 120: 13/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 121: 7/8" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 122: 15/16" Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 123: 1" Long Pattern Combination Wrench 12 Point (3,6,12 inch length), 2, EA;
LI 124: 7mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 125: 8mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 126: 9mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 127: 10mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 128: 11mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 129: 12mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 130: 13mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 131: 14mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 132: 15mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 133: 16mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 134: 17mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 135: 18mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 136: 19mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 137: 21mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 138: 22mm Long Pattern Combination Wrench 12 point (3,6,12 inch length), 2, EA;
LI 139: Open End Wrench 3/8 x 7/16" (3,6,12 inch length), 2, EA;
LI 140: Open End Wrench 1/2 x 9/16" (3,6,12 inch length), 2, EA;
LI 141: Open End Wrench 5/8 x 11/16" (3,6,12 inch length), 2, EA;
LI 142: 1/4" Drive Standard Handle Ratchet (3,6,12 inch length), 2, EA;
LI 143: 3/8" Drive Standard Handle Ratchet (3,6,12 inch length), 2, EA;
LI 144: 1/2" Drive Standard Handle Ratchet (3,6,12 inch length), 2, EA;
LI 145: 1/4" Drive 12 Point Standard Socket 3/16", 2, EA;
LI 146: 1/4" Drive 12 Point Standard Socket 7/32", 2, EA;
LI 147: 1/4" Drive 12 Point Standard Socket 1/4", 2, EA;
LI 148: 1/4" Drive 12 Point Standard Socket 9/32", 2, EA;
LI 149: 1/4" Drive 12 Point Standard Socket 5/16", 2, EA;
LI 150: 1/4" Drive 12 Point Standard Socket 11/32", 2, EA;
LI 151: 1/4" Drive 12 Point Standard Socket 3/8", 2, EA;
LI 152: 1/4" Drive 12 Point Standard Socket 7/16", 2, EA;
LI 153: 1/4" Drive 12 Point Standard Socket 1/2", 2, EA;
LI 154: 1/4" Drive 12 Point Standard Socket 5mm, 2, EA;
LI 155: 1/4" Drive 12 Point Standard Socket 6mm, 2, EA;
LI 156: 1/4" Drive 12 Point Standard Socket 7mm, 2, EA;
LI 157: 1/4" Drive 12 Point Standard Socket 8mm, 2, EA;
LI 158: 1/4" Drive 12 Point Standard Socket 10mm, 2, EA;
LI 159: 3/8" Drive 12 Point Standard Socket 3/8", 2, EA;
LI 160: 3/8" Drive 12 Point Standard Socket 7/16", 2, EA;
LI 161: 3/8" Drive 12 Point Standard Socket 1/2", 2, EA;
LI 162: 3/8" Drive 12 Point Standard Socket 9/16", 2, EA;
LI 163: 3/8" Drive 12 Point Standard Socket 5/8", 2, EA;
LI 164: 3/8" Drive 12 Point Standard Socket 11/16", 2, EA;
LI 165: /8" Drive 12 Point Standard Socket 3/4", 2, EA;
LI 166: 3/8" Drive 12 Point Standard Socket 13/16", 2, EA;
LI 167: 3/8" Drive 12 Point Standard Socket 7/8", 2, EA;
LI 168: 3/8" Drive 12 Point Deep Socket 7/16", 2, EA;
LI 169: 3/8" Drive 12 Point Deep Socket 1/2", 2, EA;
LI 170: 3/8" Drive 12 Point Deep Socket 9/16", 2, EA;
LI 171: 3/8" Drive 12 Point Deep Socket 5/8", 2, EA;
LI 172: 3/8" Drive 12 Point Deep Socket 11/16", 2, EA;
LI 173: 3/8" Drive 12 Point Deep Socket 3/4", 2, EA;
LI 174: 3/8" Drive 12 Point Standard Socket 10mm, 2, EA;
LI 175: 3/8" Drive 12 Point Standard Socket 11mm, 2, EA;
LI 176: 1/2" Drive 12 Point Standard Socket 3/8", 2, EA;
LI 177: 1/2" Drive 12 Point Standard Socket 7/16", 2, EA;
LI 178: 1/2" Drive 12 Point Standard Socket 1/2", 2, EA;
LI 179: 1/2" Drive 12 Point Standard Socket 9/16", 2, EA;
LI 180: 1/2" Drive 12 Point Standard Socket 5/8", 2, EA;
LI 181: 1/2" Drive 12 Point Standard Socket 11/16", 2, EA;
LI 182: 1/2" Drive 12 Point Standard Socket 3/4", 2, EA;
LI 183: 1/2" Drive 12 Point Standard Socket 13/16", 2, EA;
LI 184: 1/2" Drive 12 Point Standard Socket 7/8", 2, EA;
LI 185: 1/2" Drive 12 Point Standard Socket 15/16", 2, EA;
LI 186: 1/2" Drive 12 Point Standard Socket 1", 2, EA;
LI 187: 1/2" Drive 12 Point Standard Socket 1-1/16", 2, EA;
LI 188: 1/2" Drive 12 Point Standard Socket 1-1/8", 2, EA;
LI 189: 1/2" Drive 12 Point Standard Socket 1-3/16", 2, EA;
LI 190: 1/2" Drive 12 Point Standard Socket 1-1/4", 2, EA;
LI 191: 1/2" Drive 12 Point Standard Socket 12mm, 2, EA;
LI 192: 1/2" Drive 12 Point Standard Socket 13mm, 2, EA;
LI 193: 1/2" Drive 12 Point Standard Socket 14mm, 2, EA;
LI 194: 1/2" Drive 12 Point Standard Socket 15mm, 2, EA;
LI 195: 1/2" Drive 12 Point Standard Socket 16mm, 2, EA;
LI 196: 1/2" Drive 12 Point Standard Socket 17mm, 2, EA;
LI 197: 1/2" Drive 12 Point Standard Socket 18mm, 2, EA;
LI 198: 1/2" Drive 12 Point Standard Socket 19mm, 2, EA;
LI 199: 1/2" Drive 12 Point Standard Socket 21mm, 2, EA;
LI 200: 1/2" Drive 12 Point Standard Socket 22mm, 2, EA;
LI 201: 1/2" Drive 12 Point Standard Socket 24mm, 2, EA;
LI 202: 1/2" Drive 12 Point Deep Socket 10mm, 2, EA;
LI 203: 1/4" Drive Universal Joint, 2, EA;
LI 204: 3/8" Drive Universal Joint, 2, EA;
LI 205: 1/2" Drive Universal Joint, 2, EA;
LI 206: Torque wrench 1" drive 200-1000 ft-lb P/N J 24406, 2, EA;
LI 207: Torque wrench 1/2" drive 20-150 ft-lb P/N J26791, 2, EA;
LI 208: Torque wrench 1/4" drive 20-200 in-lb P/N J 8932-01, 2, EA;
LI 209: Fuel line nut wrench P/N J 5286-9, 2, EA;
LI 210: Injector tube Bevel Reamer P/N J 22582, 2, EA;
LI 211: Injector timing gauge P/N J 1853, 2, EA;
LI 212: injector tester P/N J 9787, 2, EA;
LI 213: Injector Vise and Rack Freeness Tester P/N J 22396, 2, EA;
LI 214: Tachometer drive alignment P/N J 22582, 2, EA;
LI 215: Tachometer Drive Remover P/N J 5901-3, 2, EA;
LI 216: Slide Hammer P/N J 23907-01, 2, EA;
LI 217: Vibration Damper Remover P/N J 4558-01, 2, EA;
LI 218: pressure and flow test kit P/N J 23775-01, 2, EA;
LI 219: Feeler Gauge Set P/N 2451, 2, EA;
LI 220: Mag Base Ind Holder P/N 657AA, 2, EA;
LI 221: test indicator P/N 86407335, 2, EA;
LI 222: Tachometer, Digital P/N J 26791, 2, EA;
LI 223: flex socket P/N 3377216, 2, EA;
LI 224: Rocker lever actuator P/N 3375300, 2, EA;
LI 225: injector puller P/N 3375539, 2, EA;
LI 226: injector adjustment kit P/N 3376000, 2, KIT;
LI 227: Dial indicator P/N 3822575, 2, EA;
LI 228: Mounted flappy wheels : coarse, coated P80 GRIT, 10, EA;
LI 229: Vetrified Mounted Point 60 GRIT, 10, EA;
LI 230: RESIN MOUNTED POINT 30 GRIT, 10, EA;
LI 231: VETRIFIED MOUNTED POINT 36 GRIT, 10, EA;
LI 232: SCRATCH BRUSH HANDLE, STAINLESS STEEL, 1, EA;
LI 233: 7/8 in Unthreaded Hole flap disc p120 grit, 20, EA;
LI 234: 7/8 in Unthreaded Hole flap disc p80 grit, 20, EA;
LI 235: WELDING GLOVE: KEYSONE THUMB LARGE, 2, EA;
LI 236: WELDING CAP BLACK AND BLUE, 2, EA;
LI 237: Welding Helmet: Auto-Darkening, 4 Arc Sensors,Viewing Area 9.22 sq in, 2, EA;
LI 238: KNEE PADS: NON MARRING 2 STRAPS, 2, EA;
LI 239: WELDING GLOVES: STRAIGHT THUMB, 2, EA;
LI 240: SOAPSTONE MARKER ROUND, 10, EA;
LI 241: SOAPSTONE KIT ROUND, 2, KIT;
LI 242: PIPE CLAMP: FOR 2in to 6in pipe, 2, EA;
LI 243: DIE GRINDER 28000 RPM MAX, 2, EA;
LI 244: DIE GRINDER 23000 RPM MAX, 2, EA;
LI 245: ANGLE GRINDER 11A, 11000 RPM MAX, 2, EA;
LI 246: INSPECTION MIRROR TELESCOPING, 2, EA;
LI 247: INSPECTION MIRROR: TELESCOPING, 2, EA;
LI 248: INSPECTION MIRROR W/ BASE, 2, EA;
LI 249: PLIER SET: 3 PLIERS, 2, SET;
LI 250: TONGUE AND GROOVE PLIERS, 2, EA;
LI 251: SLIDING ARM BAR CLAMP, 2, EA;
LI 252: SLIDING ARM BAR CLAMP, 3, EA;
LI 253: SLIDING ARM BAR CLAMP, 2, EA;
LI 254: LOCKING C CLAMP, 5, EA;
LI 255: BALLPEIN HAMMER SETS, 2, SET;
LI 256: DEAD BLOW HAMMER, 2, EA;
LI 257: HEADLAMP 1000 LUM, 2, EA;
LI 258: HOLDING MAGNET, 2, EA;
LI 259: HORSESHOE MAGNET, 4, EA;
LI 260: TAPE MEASURE 25FT BLADE, 2, EA;
LI 261: ADJUSTABLE WRENCH SET, 2, SET;
LI 262: HEX KEY SET: SAE/M, 2, SET;
LI 263: GENERAL PURPOSE SCREWDRIVER, 2, EA;
LI 264: ABRASIVE CUTOFF WHEELS, 50, EA;
LI 265: CARBIDE BURR SET, 2, SET;
LI 266: CARBIDE BURR SET, 2, SET;
LI 267: 115/220 AC/DC multi-process welder, 1, EA;
LI 268: 6.5 ft. (2 m) power cord with MVP plugs for 120 V and 240 V (portable), 2, EA;
LI 269: 10 ft. (3 m) MDX™-100 MIG gun and cable assembly, 2, EA;
LI 270: 13 ft. (4 m) cable electrode holder and 25 mm Dinse-style connector, 2, EA;
LI 271: 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector, 2, EA;
LI 272: 2 - Flow gauge regulators and gas hoses for argon and AR/CO2 mix, 2, EA;
LI 273: spool of .030 in. (0.8 mm) solid wire, 4, EA;
LI 274: Two contact tips for .030 in. (0.8 mm) wire, 4, EA;
LI 275: drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire, 4, EA;
LI 276: A-150 TIG torch with flow-through Dinse-style connector, 2, EA;
LI 277: RFCS-14HD foot control, 2, EA;
LI 278: AK2C TIG torch accessory kit, 2, KIT;
LI 279: Material thickness gauge #229895, 2, EA;
LI 280: Hook-and-loop cord wraps, 2, SET;

Solicitation and Buy Attachments

***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/

The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.

Headquarters U.S. Army Materiel Command

Office of Command Counsel-Deputy Command Counsel

4400 Martin Road

Rm: A6SE040.001

Redstone Arsenal, AL 35898-5000

Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil

The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.

If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.

No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.

Wide Area WorkFlow Payment Instructions

Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.

In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****

Reporting During Contract Performance

Equal Opportunity

Attachments/Links