Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract as Brand Name Specific with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial item prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.

The Contract Line Item (CLIN) is as follows:

CLIN 0001 QTY 4/EA

MATERIAL: DETACHABLE PROBE

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZHHD-WSPPPE00.312-PP10B-O#F000

DETACHABLE PROBE W/O CABLE

MODEL: WSPPP = WELD SCAN PROBE WITH DIFFERENTIAL PLUS

POINT COIL; ITEM DIAMETER: 0.312IN (8MM) COIL: PP10B= + POINT

COIL PP10B - 30 TO 400KHZ. (PEAK FREQUENCY 100KHZ). POLY TYPE:

NONE; LENGTH: SPECIAL; CONNECTOR: 3 PIN FEMALE FOR

HANDHELD MIZID: NO; COIL DIAMETER IS 0.245" (6.22MM). HANDLE IS

ON 6FT MIZ-21C CABLE 111A806-00 OR 6FT MIZ-21A/B CABLE 10025251.

TESTING: STANDARD MANUFACTURING QUALITY CHECK.

CLIN 0002 QTY 2/EA

MATERIAL: 90 DEGREE PROBE

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

SHHD-WSPPP90-E00.325-PP20A-00Z0000

TYPE: HANDHELD 2 DETACHABLE PROBE W/O CABLE; MODEL:

WSPPP90 = WELD SCAN PROBE WITH DIFFERENTIAL PLUS POINT COIL

90DEG ROUNDED TIP; ITEM DIAMETER: 0.3251N (8MM); TUBE ID: ;

COIL: PP20A= + POINT COIL PP20A - 30 TO 300KHZ. (PEAK FREQUENCY

200KHZ). POLY TYPE: NONE; LENGTH: NO CABLE; CONNECTOR: 1 PIN FEMALE

TRIAXIAL CONNECTOR HANDHELD; MIZID: NO;

TESTING: STANDARD MANUFACTURING QUALITY CHECK.

CLIN 0003 QTY 2/EA

MATERIAL: 18PIN TO 3PIN

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZES-ADP-MIZ-21C_18-PIN_TO_3-IN_ZETEC_PROBES - 6 FT

2 DETACHABLE CABLE FROM MIZ-21C 18-PIN LEMO TO 3-PIN ZETEC PROBES

CLIN 0004 QTY 2/EA

MATERIAL: 18PIN TO TRIAX.

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZES-ADP-MIZ-21C 18-PIN TO TRIAX. PROBES

6 FT DETACHABLE 2 CABLE FROM MIZ-21C 18-PIN LEMO TO TRIAX. PROBES

CLIN 0005 QTY 2/EA

MATERIAL: ENCODERS W/ CABLE

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZES-SURFX/C/EME00.000-02X016-0S31000

TYPE: SURFACE ARRAY 2 PROBE; MODEL: SURFX/C/EM = MIZ-21C

ELECTRONICS MODULE; ITEM WIDTH: 0.000IN (0MM); COIL: 02X016=

2X16 COIL COUNT SUPPORTED; POLY TYPE: NONE; LENGTH: 6FT (2M);

CONNECTOR: MIZ-21C SURFACE ARRAY CONNECTOR; MIZID: YES;

TESTING: STANDARD MANUFACTURING QUALITY CHECK

CLIN 0006 QTY 2/EA

MATERIAL: SURFACE ARRAY PROBE

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZES-SURFX/W-E01.700-02X016/50TO2800KHZ/2+POINT-0001001

2 TYPE: SURFACE ARRAY PROBE; MODEL: SURFX/W = SURF-X WELD

FLEXIBLE INTERCHANGEABLE COIL SET; ITEM WIDTH: 1.700IN

(43MM); COIL: 02X016/50TO2800KHZ/2+POINT = 2X16 ARRAY OF 0.079"

(2 MM) PANCAKE COILS WITH A 50 TO 2800KHZ FREQUENCY RANGE

AND 2 +POINT COILS; POLY TYPE: NONE; LENGTH: NO CABLE;

CONNECTOR: N/A; MIZID: YES; WELD FLEX INTERCHANGEABLE COIL

SET WITH CLOTH WEAR SURFACE. 1.7" IS THE COIL COVERAGE IN

IMPEDANCE MODE. 1.5" IS THE COVERAGE IN DRIVER PICKUP.

TESTING: STANDARD MANUFACTURING QUALITY CHECK.

CLIN 0007 QTY 2/EA

MATERIAL: SURFACE ARRAY PROBE

DESCRIPTION:

APPROVED SOURCE: ZERTEC INC (51327)

ZES-SURFX/WE01.700-02X016/50TO2800KHZ/2+POINT-0001002

2 TYPE: SURFACE ARRAY; MODEL: SURFX/W = SURF-X WELD

FLEXIBLE INTERCHANGEABLE COIL SET; ITEM WIDTH: 1.700IN

(43MM); COIL:02X016/50TO2800KHZ/2+POINT= 2X16 ARRAY OF 0.079" (2

MM) PANCAKE COILS WITH A 50 TO 2800KHZ FREQUENCY RANGE

AND 2 +POINT COILS; POLY TYPE: NONE; LENGTH: NO CABLE;

CONNECTOR: N/A; MIZID: YES; WELD FLEX INTERCHANGEABLE COIL

SET WITH SUPER FABRIC WEAR SURFACE. 1.7" IS THE COIL

COVERAGE IN IMPEDANCE MODE. 1.5" IS THE COVERAGE IN DRIVER

PICKUP.

TESTING: STANDARD MANUFACTURING QUALITY CHECK

CLIN 0008 QTY 2/EA

MATERIAL: SURFACE FLEX PROBE

DESCRIPTION:

APPROVED SOURCE: ZERTECT INC (51327)

ZES-SURFX-E01.700-02X016/50TO2800KHZ-0001001

TYPE: 2 SURFACE ARRAY PROBE; MODEL: SURFX = SURF-X FLEXIBLE

INTERCHANGEABLE COIL SET; ITEM WIDTH: 1.700IN (43MM); COIL:

02X016/50TO2800KHZ= 2X16 ARRAY OF 0.079" (2 MM) PANCAKE COILS

WITH A 50 TO 2800KHZ FREQUENCY RANGE; POLY TYPE: NONE;

LENGTH: NO CABLE; CONNECTOR: N/A; MIZID: YES; FLEX

INTERCHANGEABLE COIL SET WITH CLOTH WEAR SURFACE. 1.7" IS

THE COIL COVERAGE IN IMPEDANCE MODE. 1.5" IS THE COVERAGE IN

DRIVER PICKUP.

TESTING: STANDARD MANUFACTURING QUALITY CHECK

The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 334519 Other Measuring and Controlling Device Manufacturing with a size standard of 500 employees. The Product Service Code is 6635. The solicitation document incorporates provisions and clauses in effect through FAC 2023-01 and DFARS Change Notice 10/28/2022.

The anticipated delivery date for this acquisition is 15 JUNE 2023. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.

Quotes will be due by 3:00 PM EST on 27 APR 2023. Responses to the solicitation notice shall be emailed to the attention of Michael Williams as

Michael.D.Williams@dla.mil. Please make sure that the solicitation number (SPMYM123Q0050) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under SPMYM123Q0050. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.

All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Michael Williams at Michael.D.Williams@dla.mil.

Attachments/Links